Rubber Injection & Die Moulds

Compression, transfer and injection tooling for bellows, grommets, seals, bushes and custom rubber parts.

Tooling processes

Three ways to mould rubber

We recommend the process from your part geometry, compound and volumes, then design the tool around it.

Compression tooling

A measured blank of rubber is placed in the open cavity and the heated press closes the mould to form and cure it.

Best for
Larger parts, low to medium volumes
Strength
Simple, economical tooling

Transfer tooling

Rubber loaded in a transfer pot is pushed by a plunger through sprues into the closed cavities.

Best for
Multi-cavity parts, metal inserts
Strength
Tighter tolerances, less flash

Injection tooling

Rubber is injected from the machine barrel straight into the closed, heated mould.

Best for
High volumes, complex shapes
Strength
Shortest cycles, repeatable parts
From our shop floor

Rubber moulds we have built

Full gallery
Three-cavity bellows mould
Bellows mould, 3 cavities
Long bellows mould half
Multi-cavity rubber mould plate
Multi-cavity plate
Rubber mould with H-profile cavities
Profile cavities
Round rubber compression die
Cone-shaped rubber mould core
Bellows mould with core
Parts from these tools

What our rubber moulds produce

  • Bellows and boots
  • Grommets
  • Oil seals
  • Cover seals
  • Washers
  • Bushes and plugs
  • Silicone insulators
  • EPDM and silicone profiles
Rubber bellows
Rubber grommets
Rubber bush
For a quote

What to send us

Part2D drawing, 3D model (STEP/IGES) or a physical sample
MaterialCompound and hardness, e.g. NBR, EPDM, FKM, silicone
ProcessCompression, transfer or injection, or ask us to recommend
PressMake, tonnage and platen size
VolumesMonthly or annual quantity, and cavities if known
Request a rubber mould quote
Start a project

Send a drawing or a sample part for a mould quote.
No Commitments

Tell us the part, material and volumes. We will come back with a tooling proposal.